Register
Log In
Home
April 25, 2008
Offline
This is the SRS .41 Magnum with the extra 8" VH barrel installed. Not really a new gun, but since I had to rezero it, I figured I would try out the unfired barrel. First time I ever put it on the frame. The front sight is the wrong height for the Bomar rear, but I thought I would see how high the gun shot. With the Bomar at it's lowest setting, I started out at 100 meters...way high. Kept going further out until I found the distance it was sighted in at. 300 meters.
Looks like the barrel is going back into the safe until I find another frame for it. I could replace the Bomar with a factory sight, but I like it on the SRS. The only other option is to drill the shroud and install another Lansing hood. Not sure I want to do that to this First Edition gun.
The Savantist
May 17, 2010
Offline
Wow, thats actually some the best (close up ) pics I have seen of Servas stuff. I have to say, looks like he put his heart in it.
Soap Box, Ballot Box, Ammo Box
in that order.
4 Monson Model 15's
1 Palmer FB 15
1 Rossi 357 Model 92 (lever)
1 CZ 75B
Dans Club
May 17, 2009
Offline
That is one beautiful gun. Do you know if the Bomar rear sights are available?
October 1, 2009
Offline
Shrouds on first issues are serial numbered to the gun, right?
Or are you going to find another .41 to mount the bomar sight to?
LOVE those first issue Norwich guns! 
Supporter
Moderators
January 24, 2009
Offline
Which barrel do you normally use on this gun?
October 26, 2008
Offline
IHMSA80x80 said:
This is the SRS .41 Magnum with the extra 8" VH barrel
I think he normally has the 10" slotted version on it (the one with five slots)
Supporter
Moderators
January 24, 2009
Offline
superdan said:
I think he normally has the 10" slotted version on it (the one with five slots)
I think you're right. He has so many DW's, that I've lost track of which combinations go where.
October 26, 2008
Offline
Charger Fan said:
I think you're right. He has so many DW's, that I've lost track of which combinations go where.
many keyboards have been ruined because of that gun and SMF's 740 SRS-1
April 25, 2008
Offline
Bomar sights haven't been available for a couple years now, since they went out of business (owner was killed in an accident). Good luck finding any, and they WILL be expensive if you do.
The gun has worn the 10" slotted shroud since I bought it. And it has EIGHT slots, not five.
The Savantist
Dans Club
May 17, 2009
Offline
October 26, 2008
Offline
IHMSA80x80 said:
And it has EIGHT slots, not five.
You mean to tell me that gun has another side
Oops, my apologies. Although in my defense I only see fiv................. Oh nevermind
I blame it on a lack of coffee at the time
I'll take my punishment now 
November 4, 2008
Offline
I beleive he is refering to the vent rib slots, not the shroud slots. This is the typical way of distinguishing barrel/shroud lengths.
Why not leave the Bomar rear on and make your self a new front blade that is talller? I still use the one I made of brass on my 2.5" barrel because it shoots high even with when the rear (both DW and Millet) sights are cranked all the way down. I must add that this is true only when shooting .38 target loads though. The full power .357 shoot lower for me.
April 25, 2008
Offline
I was referring to the slots in the shroud. The first SuperMags had 4 slots with an 8" barrel. My original .414 SuperMag has a fifth slot under the barrel.
Wonder how many shrouds have 8 slots in them?
I will keep the Bomar on the frame, along with the 10" barrel and hooded front sight, as this was the development gun for the SRS series. Just need to find another frame for the additional VH8 barrel I just tried out. That may not be necessary, as I just thought it would work fine on my VH6 frame.
The Savantist
November 4, 2008
Offline
Good example of why I shouldn't post before the first cup of java is gone. 8" barrel = 4 rib vents not 8, my bad. Also was looking at your 5 slot thinking it was... never mind, you got some awesome revolvers though, real beauties!
1 Guest(s)
