Register
Log In
Home
April 24, 2015
Offline
Hello all,
I'm curious is anyone had a better idea than just getting taller burris rings.
After converting to a Bomar rear many years ago, the heavy scoped shroud has been stilling lonely. After 15 years or so I think I wanna play with the scope again without removing the Bomar (plus the pin doesnt want to come out and I forget if staked or not. The scope will not clear it as is.
Plus a few pictures to enjoy 
Craig
August 28, 2009
Offline
That Bomar rear sight doesn't have a pin in it. It's screwed into the top strap. Take out the elevation screw and flip up the leaf. You'll see the screw securing it to the top strap. The sight will come off in 60 seconds or less. Just take it off and forget the higher rings.
Dans Club
April 18, 2014
Offline
Oath Keeper #021479 NRA #206814004
Member AAGSR Member AGA #83120600233
"To preserve liberty, it is essential that the whole body of the people always possess arms and be taught alike, especially when young, how to use them."
Richard Henry Lee
American Statesman, 1788
Supporter
Moderators
Dans Club
February 22, 2009
Offline
Craig, Stop by the new members thread and introduce yourself. Glad to have you here.
Technically, the glass is always full; half liquid, half air....
April 24, 2015
Offline
harly said
That Bomar rear sight doesn't have a pin in it. It's screwed into the top strap. Take out the elevation screw and flip up the leaf. You'll see the screw securing it to the top strap. The sight will come off in 60 seconds or less. Just take it off and forget the higher rings.
It has been so long that I built the gun I forgot! Thanks.
Believe it or not, I'm an old member but recall who, what and what email I used way back I've recently caught a whiff of GAS and made me want to play with my rig more. Ha
-Craig
1 Guest(s)
