That's a great looking pair of brothers, congrats on landing your 7445. With the extra BA, you are on your way to a Pac! Just need a case, some foam, a little fabric...

In case you have the hankering, when I got my first Supermag, I built my first self-made Pac by emulating my factory 15-2 Pac. I started off with just the gun, the barrel wrench & gap gauge that came with the gun originally.

Then I decided to switch to a DW patch & 3 bullets...

Four years later, I had expanded it to a Pac, by adding 6" and 8" non-slotted BA's & retaining the patch. This is still it's current configuration. 

I'm mainly showing these in case you have had thoughts of building your own Pistol Pac. All my Dan's are in one type of Pac form or another...even some of my brand "X" guns! 

BTW, I've always loved how Norwich did the "357 MAXI" etching on the end of the shrouds. Pretty cool.

Share on TwitterShare on FacebookShare on WhatsAppShare on LinkedInShare on Pinterest

Stinger said

Charger Fan said
Then I decided to switch to a DW patch & 3 bullets...

Okay, why not six cartridges?

I just gotta know ...  

Initially, I put six in there, but after the first time I opened the case, then bumped it & the bullets scattered everywhere...I decided on the "less cluttered look" I.E., fewer bullets to chase. I always knew I would be adding BA's, so I didn't cut a pouch into the foam to corral the bullets, they just sat on top until I started adding BA's, then they went away.

Share on TwitterShare on FacebookShare on WhatsAppShare on LinkedInShare on Pinterest