Register
Log In
Home
February 22, 2017
Offline
I had to run up to Cabela's to buy some .22WMR ammo and, as usual, I stopped by the used gun counter. On the bottom shelf, calling out my name, was a Dan Wesson, Monson factory, 15-2V that looked unfired & still had factory grease in the barrel. They were asking $599 for it, as soon as I asked about a discount, they knocked $75 off & I was sold.
Almost forgot: it had the original box, paperwork & tools:
Jerry
10 Dans and counting...
Supporter
DWF Supporters
May 11, 2011
Offline
Nice find, good price. That does look in really nice shape.
Dans Club
December 5, 2008
Offline
Congrats, you did good! Thanks for the pics. It pays to keep looking. There are still deals out there!
Dans Club
October 17, 2008
Offline
Supporter
Dans Club
DWF Supporters
February 4, 2017
Offline
Nice way to start a weekend! Way to go...
"LIFE IS TOO SHORT TO SPEND IT WITH AN UGLY GUN!" - John Taffin
April 29, 2017
Offline
Hello, I just joined today because I've been looking for a while for some info, worth of a gun I got from my grandpa. Im not really a collector and the personal value the rifles i got from him far exceeds the handgun. It's a 22 win mag. Monson ma. After researching a little, I guess it's technically a 722 mag since it's stainless. Any info would be great! I've had fun researching all these threads. Thanks.
Also I never saw where to start a new thread.
February 22, 2017
Offline
snake-eye said
Congrats, you did good! Thanks for the pics. It pays to keep looking. There are still deals out there!
Thanks, I had the Pachmayr grips just laying around & think they look exceptionally nice on this gun.
Jerry
10 Dans and counting...
Dans Club
March 2, 2008
Offline
Mjgrdf said
Hello, I just joined today because I've been looking for a while for some info, worth of a gun I got from my grandpa. Im not really a collector and the personal value the rifles i got from him far exceeds the handgun. It's a 22 win mag. Monson ma. After researching a little, I guess it's technically a 722 mag since it's stainless. Any info would be great! I've had fun researching all these threads. Thanks.
Also I never saw where to start a new thread.
How about "New Members"?
I went to a bookstore and asked the saleswoman "Were is the Self Help Section?" She said if she told me, it would defeat the purpose.
George Carlin
Dans Club
March 2, 2008
Offline
jertex said
I had to run up to Cabela's to buy some .22WMR ammo and, as usual, I stopped by the used gun counter. On the bottom shelf, calling out my name, was a Dan Wesson, Monson factory, 15-2V that looked unfired & still had factory grease in the barrel. They were asking $599 for it, as soon as I asked about a discount, they knocked $75 off & I was sold.
Almost forgot: it had the original box, paperwork & tools:
GREAT Deal on a 1977 15-2 4V. The bluing looks factory fresh. If I had seen that at my local Cabela's, I would have bought it and dealt with the consequences 
later (" you bought ANOTHER ONE OF THOSE???)
I went to a bookstore and asked the saleswoman "Were is the Self Help Section?" She said if she told me, it would defeat the purpose.
George Carlin
February 22, 2017
Offline
Steve said
GREAT Deal on a 1977 15-2 4V. The bluing looks factory fresh. If I had seen that at my local Cabela's, I would have bought it and dealt with the consequences
Yep, I'm bruised & battered and sleeping out in the doggloo tonight but it was worth it!
Jerry
10 Dans and counting...
April 10, 2017
Offline
absolutely amazing pickup. thanks for sharing the extra detail over here.
As I said on the CZ forums, literally one of the best looking 15-2's i've seen. 🙂
I've got the pach's on one of my 15-2's as well -- personally I'm a bigger fan of the wood grips and plan on upgrading mine to something like the LB Customs unless I can find a set of originals at a reasonable price point.
February 22, 2017
Offline
Performify said
absolutely amazing pickup. thanks for sharing the extra detail over here.As I said on the CZ forums, literally one of the best looking 15-2's i've seen. 🙂
I've got the pach's on one of my 15-2's as well -- personally I'm a bigger fan of the wood grips and plan on upgrading mine to something like the LB Customs unless I can find a set of originals at a reasonable price point.
I've been looking for a 15-2 for several months but hadn't seen "the one" that looked good and was at the right price. I looked at a lot of listings on gunbroker but couldn't bring myself to buy one without actually laying eyes on it and handling it. Just happened to be in the right place at the right time for this one.
This DW came with the wood grips you see in the pics and I had purchased the Pach's to possibly go on my 715. I think they actually look better than the grips that came with this gun. They're just to bulky and almost look like someone smoothed out a small tree limb & cut holes in for a Dan Wesson. I would like to get more traditional wood grips with the DW logo but, as you said, those are usually overpriced. I'll probably eventually change out the Pach's with something nice but they'll do just fine for now.
I want a short barrel more than grips so I'll probably get that first.
Jerry
10 Dans and counting...
June 25, 2011
Offline
Hey there is at least one seller asking $100 for that original barrel wrench. I got $100 for my, whole, two barrel rig, back in 1980. 
It was a low number too but above your beauty.
Range Officer
Range Officers
Dans Club
February 9, 2009
Offline
Congratulations on the nice find!
A man cannot have too many SuperMags
April 25, 2008
Offline
The Savantist
September 11, 2010
Offline
Nice find. 3 years ago when I was walking through Gander Mountain I looked and saw a revolver in the used gun case.. I looked closer seeing the side lock and was like is that a Dan Wesson?? asked to see it..yup a 6" 15-2. then I looked at the price tag. $225 I looked again and as im looking the counter guy says..we have it priced at $225 because it may need some work.. the Cylinder is tight and binding the barrel some... Having a 15-2 4" that id bought 1.5 years before this find I knew what the issue was..I popped open the cylinder to make sure there wasnt any kind of forcing cone damge/cracks or anything wrong...nope...I knew that someone just didnt have a clue on how to gap the barrel/// took it home for $225 cleaned it up..re-gapped it with my EWK feeler gauge and its now 100% . Best $225 i ever spent lol. Now that I have the 6" im thinking of selling the 4" to fund other projects.
Supporter
DWF Supporters
June 11, 2016
Offline
February 20, 2008
Offline
You've done well Grasshopper!
If you're going to drink, don't drive. Don't even putt.
Supporter
Range Officer
Dans Club
Range Officers
Members
July 2, 2011
Offline
Well done, indeed! Don't be too quick to sell the the 4". After all, there are other funding avenues. Still have BOTH of your kidneys? 
To the paranoid people who check behind shower curtains for murderers:
if you find one...what's your plan?
1 Guest(s)
