Register
Log In
Home
September 1, 2010
Offline
Can I put a 32 HR cylinder & bbl. on a 22 cal DW frame and use the 22 cal shroud ? same question for 357 frame ?
Thanks in advance
TWO
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
I believe the rim-fire (22) frame will be a problem ( firing pin off center), but the model 15-2 frame should work fine. It will require a custom barrel as all calibers are threaded different. Also it goes without saying you have to be sure you don't cross up the barrels and cylinders. 357 down a 32 tube would not be pretty! All small frame shrouds will interchange calibers. I have shot my 22 with a 357 shroud many times.
LB
Wisdom is merely the realization of how little one knows, therefore I am wise.
September 1, 2010
Offline
lbruce said:
I believe the rim-fire (22) frame will be a problem ( firing pin off center), but the model 15-2 frame should work fine. It will require a custom barrel as all calibers are threaded different. Also it goes without saying you have to be sure you don't cross up the barrels and cylinders. 357 down a 32 tube would not be pretty! All small frame shrouds will interchange calibers. I have shot my 22 with a 357 shroud many times.
LB
Thanks LB, I didn't even think about the Rim- fire aspect.
Can't seem to locate a DW 32 cal and the ones that r available r
to pricey so thought about making my own. sounds like it might work
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
Do you have a 32 barrel and cylinder? I'd be interested in it.
SHOOT
September 1, 2010
Offline
SHOOTIST357 said:
Do you have a 32 barrel and cylinder? I'd be interested in it.
SHOOT
no, need both
TWO
Range Officer
Range Officers
Dans Club
March 27, 2009
Offline
The 32/ 32-20 are both rare and hard to find! Settle in and watch good things will come to those that wait!
Several of us are waiting for the 32's to come around. Maybe sleeve and 357!!
1 Guest(s)
