Register
Log In
Home
Dans Club
March 2, 2008
Offline
Interesting refernce in a GB Auction:
"Original Monson made Dan Wesson Revolver. Judging
by the serial number it was made around 1976 (according to
danwessonforum.com's serial number list)."
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=215968687
I went to a bookstore and asked the saleswoman "Were is the Self Help Section?" She said if she told me, it would defeat the purpose.
George Carlin
May 17, 2010
Offline
Yeah I saw that... odd looking grip on it.
Did you see the "trivia" post???? They ask veiwers not to bid but to just email them with what they had. Looks to me to be some custom "re-fabricated" DW parts. In fact it looks like a 15-2 shroud with a barrel marked .44 mag. The barrel nuts were wrong, and there was a pin at the ejector rod point in the shroud. I figure they were done up to go on a smiff or colt...
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=216564822
Soap Box, Ballot Box, Ammo Box
in that order.
4 Monson Model 15's
1 Palmer FB 15
1 Rossi 357 Model 92 (lever)
1 CZ 75B
Supporter
Moderators
January 24, 2009
Offline
Pinetor said:
I figure they were done up to go on a smiff or colt...
I think you're exactly right. I'm guessing with Smith, probably an old pencil barrel .44 Special? That's about the only one I can think of that would have a small enough frame to accept a 15-2 size BA.
Steve, the word's officially out...the
is THE place for accurate DW info.
Good work, brother!
August 29, 2009
Offline
I actually have one of those barrels. I bought a pac a short while ago and one of those barrels was in the pack. I've had sitting here wondering what it goes to. It's exactly like the barrel showed in that auction but scribed .357. Same nut as well.
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
If you look close, the shroud metal is very thin around the nut--probably had to open it up a little to fit the nut in.
I'm going with the 357 shroud, fabbed barrel/nut idea...
Harley--is yours threaded for DW?
SHOOT
1 Guest(s)
