Register
Log In
Home
DWF Supporters
June 21, 2014
Offline
hi, guys.
i am finishing my parts list for my 4th Dan 15-2.
Here in Boston it is tough, dans are NOT on "The List", and cannot be transferred. I must buy blank frames (no barrel or cylinder attatched), and then look for a parts kit. THEN, if I finish it *I* have to let the state know about it. What a pain.
ok, let's look on the bright side - I am slowly getting another ready for a build!
It will be painted, and will have probably BOTH a vent-rib shroud, and extra heavy from Eric.
4-6 inches.
what light weight rigs are there for getting a red dot up on top?
i really don't feel like tapping for a mount, to THEN add a scope, and need rings. What dots can clamp on, or mount directly?
This is for rec shooting. 70 yds and under.
thanks
Have you ever noticed that 3+5+7 is GREATER than 9+1+1 ? .
-Steve K.
February 16, 2016
Offline
GetAGrip said
I am finishing my parts list for my 4th Dan 15-2. Here in Boston it is tough, dans are NOT on "The List", and cannot be transferred. I must buy blank frames (no barrel or cylinder attatched), and then look for a parts kit.
You should make friends with 'toltec' on GunBroker then, because that's what he does ... buys Dan's and Pistol Pac's and breaks them up and sells components.
DWF Supporters
June 21, 2014
Offline
I forget his real name. Jim?
he won't remove the cylinder for me.
I have asked him nicely four times.
i am not worth 4 minutes of his time.
Have you ever noticed that 3+5+7 is GREATER than 9+1+1 ? .
-Steve K.
DWF Supporters
June 21, 2014
Offline
Does anyone have a model of micro red dot that is easily mounted?
there is a nice looking one up above, in the photo banner marquis.
Have you ever noticed that 3+5+7 is GREATER than 9+1+1 ? .
-Steve K.
1 Guest(s)
