Register
Log In
Home
September 27, 2008
Offline
I need that little half moon dowel cylinder stop that's missing in my 15v 80's 357. I went to the DW site to find a parts blow up, but couldn't find one. Does anyone know the part number and a way to contact the Co. to order one? Thanks, Frank.
September 27, 2008
Offline
anzafrank said
I need that little half moon dowel cylinder stop that's missing in my 15v 80's 357. I went to the DW site to find a parts blow up, but couldn't find one. Does anyone know the part number and a way to contact the Co. to order one? Thanks, Frank.
I found the parts site and ordered it. The cylinder stop is the size of a fly and is 17 bucks for the part and 9 to ship. Ha! Anyone know if It's a tight fit and is lock tight needed?
Supporter
Dans Club
March 25, 2013
Offline
anzafrank, the "part" is called a cylinder stop and it is part of the side plate. An unfortunate design flaw results in it breaking off. Probably all model 15s will have it happen eventually. The part you bought will probably require minor fitting and yes, loctite. The good news is that the repair should be permanant and stronger than ever.
December 4, 2012
Offline
I have some misc. parts that I have accumulated over the yrs. Let me see If its in my collection of spare goodies..
Supporter
Moderators
Dans Club
February 22, 2009
Offline
Initially it was a separate part, later it became an integral part. Glad you found one. It should be a friction fit but certainly will come loose again. I'd use red locktite or some sort of strong adhesive like JB Weld.
Technically, the glass is always full; half liquid, half air....
1 Guest(s)
