Register
Log In
Home
May 9, 2016
Offline
Topic name states it. Just picked up my first DW 15-2 Monson and looking for some parts and knowledge to fix her up.
Thanks!
DWF Supporters
February 1, 2016
Offline
to 
from Ohio, you're at the right place.
If someone does not have what you need, You'll find ref. here 
always help
SIZE DOES MATTER
Range Officer
Range Officers
Dans Club
February 9, 2009
Offline
t the DWF from PA. What all are you looking for?
SMF
A man cannot have too many SuperMags
May 9, 2016
Offline
I've got it posted in the gunsmithing thread. 15-2 complete ejector/extractor set. I picked up a 15-2 for well under $300 because it was missing those parts and I plan to rebuild it with a 6"VH from the current just vented, small underlug set up. I will also be having it reblued to maybe Colt Royal Blue. New grips as well.
April 25, 2008
Offline
to the forum! You'll get lots of answers here.
What part of KY? I live in northern KY, by the CVG airport.
The Savantist
February 16, 2016
Offline
UKalum said
Just picked up my first DW 15-2 Monson and looking for some parts and knowledge to fix her up.
Now that you've got your parts, do you have any questions about installing the Ejector Rod ?
May 9, 2016
Offline
East KY
Yes. The extractor seems to be flaired out enough so that the rod can be pushed through the female threading. If I thread them together just a little, the rod pulls right out.
DWF Supporters
February 1, 2016
Offline
UKalum said
Yes. The extractor seems to be flaired out enough so that the rod can be pushed through the female threading. If I thread them together just a little, the rod pulls right out.
Sound like no choice on needing extractor also, guess you're waiting again. 
Unless someone has an extra here.
SIZE DOES MATTER
May 9, 2016
Offline
I wish I could find one here. Called them today, waiting on call back tomrrow I hope.
DWF Supporters
February 1, 2016
Offline
UKalum said
I wish I could find one here. Called them today, waiting on call back tomrrow I hope.
Put it on the wanted thread. Maybe you'll get lucky.
SIZE DOES MATTER
February 16, 2016
Offline
UKalum said
The extractor seems to be flaired out enough so that the rod can be pushed through the female threading. If I thread them together just a little, the rod pulls right out.
Extractor from Norwich is $48.95 (and a $9 shipping fee). This part is considered a factory install item, because it requires fitting by a gunsmith.
You can either ship your gun to the factory for installation or they can ship the part to your local gunsmith who has an FFL.
May 9, 2016
Offline
From what I understand, the guy I bought it from tried using a a screw or something he had to make a makeshift ejector rod, I'm 99.9% sure that's what caused the flairing out. Just found out a bit ago.
February 16, 2016
Offline
UKalum said
The guy I bought it from tried using a a screw or something he had to make a makeshift ejector rod,
May 9, 2016
Offline
More than likely, I'd be able to handle it, whole engineering background thing going on. Actually building a place to run accessory shop until I finish paperwork for shop and gunsmith FFLs.
May 9, 2016
Offline
Call back from them over it, like Stinger noted, factory installed part.
I absolutely detest knowing that my options are to pay a good amount for a little amount of fitting from either them or my local FFL gunsmith, who won't even work on ARs because he claims they are too difficult. (I build my own anyway, just a conversation with him) I've also fixed my own revolvers...I guess it's time to email Bo at CZ and see the price. May take the current extractor to the shop and see what I can do.
February 16, 2016
Offline
UKalum said
I absolutely detest knowing that my options are to pay a good amount for a little amount of fitting from either them or my local FFL gunsmith.
I did not say you had to get your gunsmith to do the work, I said Norwich has to ship it to a FFL Dealer. Just get them to give the part to you when it arrives. It is just a CYA liability risk mitigation policy.
May 9, 2016
Offline
I understand that. I was stating what they told me. I find it funny that I can order parts that withstand a ton more force, pressure, etc and can do much more damage if they fail, straight to my door.
I wish I could get a reply to my wanted thread for one.
Edit:
Fixed it myself. Finally, a fully functional 15-2. I milled a 1.4mm "key" to keep in the extractor grove and slowly and lightly tapped the flaired out bottom from the top down to the female threads. Screwed in rod and works perfectly.
February 16, 2016
Offline
UKalum said
Fixed it myself.
Even better.
January 22, 2008
Offline
Welcome from SC. Show some pics of your work?
…he that hath no sword, let him sell his garment, and buy one. Luke 22:36 Life in a Jar: The Irena Sendler Project http://www.irenasendler.com/
USN-Vet, NRA, GOA, JPFO, SC-GRGR
1 Guest(s)
