January 1, 2012
"My mama said, you and Elvis are pretty good, but you're no Chuck Berry" Jerry Lee Lewis.
Supporter
Range Officer
Range Officers
May 2, 2009
Supporter
DWF Supporters
October 11, 2009
Supporter
Moderators
January 24, 2009
January 1, 2012
Thanks for the welcome! I put a couple of boxes of 38 special through it at the shop during the 10 day wait. It shoots both single and double action very nicely when cold, but binds up in double action when it gets warm. Soooo... I checked the cylinder to barrel gap when I got it home.
My thinnest feeler gage is 1.5 thou and it doesn't fit. I can just insert it if I push the cylinder back against the spring, so I reckon the gap must be about 1 thou. The good thing is, even with that gap, there is no interference between the barrel and cylinder at any position, so the run out must be very good.
Now I need to wait for the barrel wrench I ordered from EWK. I bought the one that I can put a socket wrench on because looking at the nut - see below - I think the last owner decided that tighter was better.
By the way, do you guys have any recommendations for torque value for the nut - or should it be just nice and snug.
"My mama said, you and Elvis are pretty good, but you're no Chuck Berry" Jerry Lee Lewis.
Range Officer
Range Officers
Dans Club
February 28, 2009
I set all of my Dan's to .002 at the tightest position. Set the gap to .002 and pull the trigger 6 times and check the gap after each trigger-pull. If you find one too tight, start over at that position.
The torque for the barrel nut should be a firm hand-tighten.
You might want to get a new barrel nut from Eric as well.
BTW, welcome to the DWF.
-Mike
DWF Supporters
Dans Club
Moderators
November 17, 2008
January 1, 2012
Barrel wrench arrived today. Thank you, Eric. It's beautifully made, and shipped quick.
I was right about the nut - IT WAS TIGHT. But with the socket adapter, the wrench worked like a charm.
Thanks, Nigel
"My mama said, you and Elvis are pretty good, but you're no Chuck Berry" Jerry Lee Lewis.
Range Officer
Range Officers
Dans Club
March 27, 2009
May 17, 2010
Welcome! Great pics and range report.. man your gonna fit right in! Order some spare barrel nuts, get a FO sight and nice LB grip and your all set!
I actually just set mine per the DW standard, EWK also sells that with some hex keys. (.006")
Soap Box, Ballot Box, Ammo Box
in that order.
4 Monson Model 15's
1 Palmer FB 15
1 Rossi 357 Model 92 (lever)
1 CZ 75B
January 1, 2012
I ordered a 2.5 in barrel from CZ/DW on Dec31. They had a 15% off deal, so I couldn't resist. FedEx tell me it's on one of their trucks right now. I'll take some pics when it arrives - and even more when LB starts taking orders again. i reckon Gripper grips will look good on the snubby.
"My mama said, you and Elvis are pretty good, but you're no Chuck Berry" Jerry Lee Lewis.
1 Guest(s)