Register
Log In
Home
September 4, 2019
Offline
Hi there, I recently purchased a DW .357 porkchop mod 15. Yesterday I decided to dismantle and clean all parts, and noticed that the shroud didn't come off the barrel without the help of my plastic hammer. I noticed the barrel is bulged 1" from the start (cylinder side). I 'm looking for a replacement barrel, 6" version, but here in Belgium (Europe) I can't find any. I mailed CZ-USA, no reply yet. And Eric from EWK Arms doesn't ship outside US... Pitty, I 'd trust his barrels more than the others. Can anyone come up with some help, please? Best regards, Koen
September 4, 2019
Offline
Dans Club
January 17, 2015
Offline
Can you not find a shop in the US that does international exports? That's what I did when I bought items from EWK to get them up to Canada. Company I used was Aztech Armory in Arizona.
September 4, 2019
Offline
Zedbra said
Can you not find a shop in the US that does international exports? That's what I did when I bought items from EWK to get them up to Canada. Company I used was Aztech Armory in Arizona.
Thanks for the tip, Zedbra. I 'l have a look at it.
Supporter
Range Officer
Moderators
DWF Supporters
Dans Club
December 4, 2011
Offline
Try contacting Dan Wesson directly in New York. Being owned by CZ, they should be able to ship a part out of the US.
Anything worth doing is worth doing well.
My father
If a man designed it, and a man built it, then a man can fix it.
My grandfather
December 25, 2019
Offline
Did you get this solved ? One solution would be to get in touch with Gibraltar Arms ( https://www.gibraltar-arms.com/ ) which can help exporting weapon parts ( oh, and weapons as well ) out of the us and over to us dweebs in europe for a modest fee. 5-15% if I recall correctly.
/J
Supporter
Dans Club
March 25, 2013
Offline
Koen, I am afraid there is another problem. Porkchop barrels are 1/4" shorter than the 11 and 12 or the 14-2 and 15-2. They eliminated the exterior nut and just made the barrels 53/4". They occasionally show up on Ebay but you would have the shipping problem. You could have a 6" barrel shortened and rethreaded, or perhaps put a second nut on the end. Have you tried shooting it with the bulge? It may not affect performance. My wife says I am a glass half full guy.
1 Guest(s)
