Register
Log In
Home
May 30, 2010
Offline
I load 180gr lead bullets for my 15-2 in .357 with fine success. I have recently picked-up a supply of 190gr cast lead but can find no load data in any of my manuals of which I have many. I can find loads for 180's and 200 gr loads but none for 190gr. There are significant differences between manuals for these bullets so trying to build a load from these differences is not something I want to do unless all else fails. If anyone out there has a good load and/or some good advice I would like to hear from you. Thanks
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
you can use the 200 gr data safely until I can dig up some load data. A lot of manuals state 190/200 in their loads anyway.
SHOOT
May 30, 2010
Offline
Thanks Shootist357 - I've considered using 200 gr load data and working up a load from there, except there seems to be a range of loads using the same amount of powder from one to the other. If all else fails, I will probably go with the lowest suggested 200gr load and work up from there. If you come across anything else let me know. Thanks
1 Guest(s)
