Register
Log In
Home
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
OK I stumbled across this on GB. A shortened 375 Win Mag will be a 375 supper mag and will not fit a 357 max, correct, or am I missing something. I started to email the guy and tell him but I thought I would consult the brain trust before I stated the obvious as sometimes I miss the obvious.
http://www.gunbroker.com/Auction/ViewItem.aspx?Item=330629525
LB
Wisdom is merely the realization of how little one knows, therefore I am wise.
January 22, 2008
Offline
I wouldn't think that would work...
Supporter
Range Officer
Moderators
DWF Supporters
Dans Club
December 4, 2011
Offline
Either he doesn't know what he is talking about, or he is dislexic and has the '7' and '5' transposed. If those really are cut down 375 Win Mag, they won't fit in a 357 max, they're too large in diameter. They would work nicely in a 375 SM though.
Anything worth doing is worth doing well.
My father
If a man designed it, and a man built it, then a man can fix it.
My grandfather
Supporter
Moderators
Dans Club
February 22, 2009
Offline
go ahead and write him- he's confused. If they are 375 headstamp, and you want brass for a 375, I'd ask him to put a caliper on the length, to make sure they are around the 1.6" length. He is correct, in a way; both are the same length. The diameter is what gets you; .358" vs .376", on my examples.
Technically, the glass is always full; half liquid, half air....
1 Guest(s)
