Register
Log In
Home
May 3, 2011
Offline
This isn't a DW, but it's a similar problem that comes up with scope mounts. I have 4 screws in this scope mount. The first 3 came out without to much trouble. The lead screw must have loctight on it. I'm using the right size screw driver, but it doesn't want to turn without damaging the screw head. It's still tight. I don't have to take it off, but it would be nice.
Any suggestion on how to get this screw out?
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
Hey Gary, Start with a soak (penetrating oil), then a little heat (hairdryer) next you will need a flat head screwdriver tip for a drill driver, a 1/4 inch box end wrench, and a C clamp. Probably an extra set of hands. I am confident you can figure out what I have in mind.
LB
Wisdom is merely the realization of how little one knows, therefore I am wise.
September 26, 2010
Offline
Drill it and use an easy out.
1 Guest(s)
