Register
Log In
Home
October 13, 2009
Offline
Hey Guys! Thought I'd post up some pictures of what we've got so far on the barrels and shrouds. For a rewind (since its been so long some of you may have forgotten) planning on making new barrels and shrouds for Dan Wessons. I wanted to start with the 15" ones since the longest ones would be the most difficult to manufacture hence getting everything figured out. But planning on making all of the shrouds and barrels variations Dan Wesson did, and some others that are quite exciting… Long story made short, getting setup to make these has turned out to be quite a battle. But finally we're starting to get some results-here's what we have so far…real progress has been made in the last couple days…everything is made here in house…except the front sight and setscrew…plus the barrel blanks…just haven't got around to those yet.
Keep in mind this is just one of the test pieces…its not 100% where I want it to be/finished products will be…biggest difference is that the bluing doesn't quite match the originals (but no problem, I just didn't have fine enough buffing compound on hand-I wanted to get SOMETHING done!!!) Will try posting up some better pics, (I'm not an expert with taking pictures) but here's some for now.
[Image Can Not Be Found]
May 14, 2008
Offline
Way to go Eric, I'm sure there are a few people here that can't wait for the finished 100% version.. Yes that includes myself..
Range Officer
Range Officers
Dans Club
February 9, 2009
Offline
Eric,
That is very impressive to say the least. Just add some of that bluing so deep that you can see,.. well you know. It looks like you really have your maching part down. Eagerly awaiting the finished product.
SMF
A man cannot have too many SuperMags
November 14, 2009
Offline
Eric,
Now that is really nice, I mean really really nice. Wish I had one.
Happyness is a Hot DW and a pile of used brass!!! Rich
February 20, 2008
Offline
Very cool~! Great work...keep us posted, please~
Photo
If you're going to drink, don't drive. Don't even putt.
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
AWESOME 
Very nice work... You should show them a pic of the other side where it says SHOOTIST357 .... LOL
SHOOT
Supporter
Moderators
January 24, 2009
Offline
WOO-HOO, look at that!!
It's a thing of beauty Eric, very nice work!
Can't wait to place an order for a few of those.
Range Officer
Range Officers
Dans Club
February 28, 2009
Offline
Eric:
If that's just a start, then the finished product will be absolutely incredible.
-Mike
October 13, 2009
Offline
Thanks for the kind words guys!
I'm hoping to have a chance to try firing it this weekend...that should be fun!
Start saving money so you can own many of them! You've been warned.
I didn't engrave Shoot's name on the other side...but he among others have been going through my mind as I've been working on 'em...so you can say its on there, but you just can't see it!
Eric
Range Officer
Range Officers
Dans Club
February 9, 2009
Offline
Could there be a 12" 44 in the works??
A man cannot have too many SuperMags
Dans Club
May 17, 2009
Offline
Eric,
Now that is SOME hunk of steel. I'm definitely interested in a few.
Ed
March 25, 2008
Offline
I know! but I HAVE TO ASK is there any plans to work up options for 44's? slotted octagon blue 6"
July 5, 2009
Offline
Eric,
When I look at your work, the title "master machinist" comes to mind. It's like looking at a piece of fine art, but functional. Congratulations on your successful completion of you first functional prototype. I hope all goes well at the range. I'm looking forward to a range report.
GG
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
Looks awesome!!! Can't wait until you are taking orders.
LB
Wisdom is merely the realization of how little one knows, therefore I am wise.
January 22, 2008
Offline
Eric, very nice looking work. I think it's only appropriate that I get to to place the first order. 
Seriously nice work!
August 29, 2009
Offline
Your are making the shroud? Could you mod the shroud to have a rail?
I would love a shroud with a rail for a laser for my 741.
Supporter
Range Officer
Range Officers
May 2, 2009
Offline
Jody said:
Eric, very nice looking work. I think it's only appropriate that I get to to place the first order.
Seriously nice work!
You can place the first order, but do you really want a shroud with "SHOOTIST357" on it......
SHOOT
January 22, 2008
Offline
Shoot it might be worth it knowing that you would want it! I'm sure there's something in your stash that I would be willing to trade it for.
Eric, It is very exciting to see the progress. Keep us posted!
October 13, 2009
Offline
Thanks again for the comments guys!
Weekend has come and gone, and didn't have a chance to test fire it....will try for next weekend...
Pops2, That wouldn't be a problem!
Supermagfan, Definately! The .357' are going to be first, but with slight tooling change .44's/large frames aren't a problem...
Landtoy80, Yes, making the shrouds...and the barrels...and the nuts...etc. Even planning on making the barrel blanks in house too. I've found its a problem to get good pistol barrel blanks...With already having gundrilling equipment that can handle drilling/reaming pistol barrel blanks...I think it only makes sense...
And yes, integral picatinny rails are definately on the list...like near the very top!
Okay Jody and Shoot, you have definately some things to sort out so everyone is happy... 
Eric
2 Guest(s)
