October 13, 2009
I have finally got an on-line store going. Just got put the finishing touches on it, but may have missed something…I'm not an expert when it comes to these things! If you could check it out and post your thoughts, I'd appreciate it!
Also if you have time, take it for a test drive and see how it works! Just write "This is just a test" in the notes area on the order so I don't get it confused with a real order, and select money order check for payment. After I see this is just a test I'll delete the order.
There should be a coupon if I did things right (for real or test orders) its DWFCus
Free shipping for my friends here!
http://www.ewkarms.com/zencart/
Eric
DWF Supporters
Dans Club
Moderators
November 17, 2008
Supporter
Range Officer
Range Officers
May 2, 2009
May 17, 2010
Test? are you kidding me? Order placed!
OK crits:
The font/contents seemed too small for my eyes.. I used the IE Veiw to adjust it to 125% and it was perfect.
No "about us" – no time to be shy
The white on white new user account was hard to see, maybe a light grey background would help.
While the categories is pretty compact now, if you do expand it might be nice to break out by Manufact ( DW, S&W, Ruger) then expand within that (would add another level).
Hey how come the S&W barrel wrench gets the cool brass pilot and we get an AL?? (kidding).
Soap Box, Ballot Box, Ammo Box
in that order.
4 Monson Model 15's
1 Palmer FB 15
1 Rossi 357 Model 92 (lever)
1 CZ 75B
Supporter
Moderators
January 24, 2009
October 13, 2009
Great, thanks guys for the feedback, tests and orders!!!
Great point on the size of the page, I just tried resizing it. I think it looks a alot better. Couple pieces of text and headers that are off, but with my limited computer skils, haven't figured out what needs to be done there!
Re. brass pilots, S&W guys have money. Seriously, its because of the design of the wrench, those are pressed in and not interchangeable so brass works better there. Aluminum works great for interchangable pilots, but brass is in my mind to do sometime.
Also, I didn't realize I had international shipping available on the store, which I can't do. Very sorry about that! However, Brownells is going to carry several items, and while they are not on their website now, if you contact me I can give you the part numbers and you can order them.
Agree I need an about us. Need to do some more, but I just had to get a store going.
Harly, on thos adapters, I'd like to do them too, but trying to focus more on stuff that isn't available now. Plus I need to be able to buy those guns to work off of. That $$$ factor!
LB, planning on putting the "stock" barrels and shrouds in the store, and then have something for customs, ideally a page that would give examples.
Thanks again!
Eric
November 5, 2010
I just registered here so I could post on this thread. Searching for a barrel tool I found your website and wanted to order a tool, but there is no way to specify anything other than the 44 pilot that comes on your large tool, and I need a 41. So how do I go about ordering a barrel tool for large frame with a 41 pilot?
October 13, 2009
Hey Karl, Welcome!
I sent you an e-mail, and as I mentioned I need to put the pilots in the store for purchase invidually. But go ahead and order the wrench and just say that you need a .41 cal pilot in the note section during checkout and we should be set!
Thanks!
Eric
October 26, 2010
Great site man, was checking it out earlier. I actually found that it was an order site when I was just looking to link a pic of one of the grips in my post.
Got all excited thinking there was a category for the shrouds for my newly aquired DW 715 .375. Was when I couldnt find it. Lol
Great job man, will check frequently for the shrouds section.
"The very atmosphere of firearms anywhere and everywhere restrains evil interference – they deserve a place of honor with all that's good" – George Washington
2 Guest(s)