Register
Log In
Home
February 16, 2016
Offline
The 3" FB I use in my avatar is a Palmer stamped frame.
November 3, 2019
Offline
Here's my 4" fixed barrel in stainless. I've cleaned up some of the scratches since this photo; the way they show scratches is one of the only things I don't like about stainless finishes.
October 28, 2019
Offline
Fair Winds and Following Seas
March 29, 2022
Offline
I got a 3” fixed barrel 357 mag, pretty rare I heard, but I don’t know enough about them.
December 21, 2021
Offline
I have a 6inch Palmer stainless 44mag fixed barrel, shoots cloverleaf at 20 yards.love it bought it new in the 80s? Big sob too hard to find leather for it.makes my 686+ smith and Wesson look like a toy,44 specials have no kick like a 22.full bore 2400 and h110 lift the barrel just enough to snag the hammer for the next shot. One thing I've noticed is the fixed barrels have a bevel in the under lug at the front sight.the removable are straight up and down .
Supporter
Dans Club
March 25, 2013
Offline
That bevel is the dead giveaway when Gunbroker sellers neglect to mention it is a fixed barrel. Fixed barrels are nice guns but I have eschewed them. Kind of like half a Dan. JMHO.
May 21, 2023
Offline
wondering what kind of a wrench is used to remove the barrel on a fixed barrel and which way are threads on front vs back of barrel
DWF Supporters
March 28, 2023
Offline
I just got my 7VH compensated LNIB! $815 out the door including tax and shipping! I think these comp barrels are even more rare!
February 16, 2016
Offline
Stmstan 445 said
I just got my 7VH compensated
715-H6FB-C
Dans Club
February 24, 2013
Offline
Supporter
Dans Club
March 25, 2013
Offline
Steyr, the fixed barrels are torqued on and the barrel nut at the muzzle end has either no slots or maybe the rear of the slot is milled off so you can screw it on but not off. I don't know how the barrel is removed at the factory but I have read that the barrel tube is not always reusable. Perhaps they insert a mandril into the barrel that uses the rifling to unscrew the barrel from the frame?
May 21, 2023
Offline
thanx but not sure what u mean by slots removed, barrel liner is threaded on both ends and clockwise im sure or maybe clockwise and counter clockwise for torque but yes the probably used a nylong rifled mandrel to screw on
May 21, 2023
Offline
my muzzle looks like a clockwise thread with the sliver of thread showing
Supporter
Dans Club
March 25, 2013
Offline
The slots on a barrel nut that are used to screw it on or off. If you screw it on with a tool but can't remove it if the back of the slots are milled. If you screw on a barrel nut with the slots inside you will have a defacto fixed barrel.
1 Guest(s)
