Register
Log In
Home
January 22, 2008
Offline
Guys,
Found some pictures of a High Standard Sentinel Mk II that I thought I would share. As some of you know High Standard manufactured some revolvers based on the Dan Wesson design. To my knowledge the only difference is the barrel can not be removed. Not sure how they accomplished this since I haven't examined one of this guns up close. Does anyone have any experience with these guns?
January 22, 2008
Offline
Here are some pictures and text from a GunBroker auction.
High Standard Sentinel 357 mag 6 shot 2 1/4" bbl. Gun actually made by Dan Wesson for HS 1974-5.
The text above is inaccurate if I'm not mistaken. It is my understanding that High Standard manufactured these revolvers with the only difference being that the barrels were not removable. If anyone else has additional information on these please share.
February 23, 2008
Offline
Jody:
Some of the High Standard guns had non-removable barrels and some had removable barrels. I thought all the High Standard and Dan Wesson guns were made in the same facility, but I could be wrong about that.
FWIW, I have a HS Sentinel Mk II removable barrel/shroud/nut combination that works just fine on my DW Model 14. I don't have a photobucket or similar account to upload a photo but I sent one to your email address and you can display it if you like.
-Lee
January 22, 2008
Offline
Folks here is a picture Lee was kind enough to provide for us. As you can see it is a High Standard Sentinel MKII barrel and Shroud.
Lee thanks again for the info above and the picture below!
1 Guest(s)
