Register
Log In
Home
February 12, 2014
Offline
I am looking for a gunsmith that can fit a new cylinder to my 744. An suggestions would be greatly appreciated. I live in the Mississippi Gulf Coast area.
August 28, 2009
Offline
Contact Glenn Davis in the Service Dep't. at Dan Wesson and send it up to them. DWService@CZ-USA.com.
Dans Club
March 2, 2008
Offline
You really want to have DW in Norwich do this work. They will do it right the first time, and just in case it's not right, they will make it right. Almost any local gunsmith will be fighting to learn how to work on a DW.
I went to a bookstore and asked the saleswoman "Were is the Self Help Section?" She said if she told me, it would defeat the purpose.
George Carlin
February 12, 2014
Offline
That is what I figured. Just wanted to know if there was anyone else that could do it. The reason I asked, is I want to convert a 744 to 45 Colt. If they will fit a 45 Colt cylinder then that would be easier than rechambering the existing cylinder.
March 25, 2008
Offline
you need to swap out the barrel also, which will mean you have to rethread the gun or the barrel. Dan Wesson made a point to change the barrel threads between caliber for safety reasons.
October 26, 2008
Offline
pops2 said
you need to swap out the barrel also, which will mean you have to rethread the gun or the barrel. Dan Wesson made a point to change the barrel threads between caliber for safety reasons.
What he said
February 12, 2014
Offline
I have a place that can turn a barrel for me. I figured it would be easier to do a barrel than trying to rethread the frame. I guess I will speak with the contact at DW and see what they say.
August 28, 2009
Offline
The factory won't fit a .45LC cylinder to a .44 frame. You can ask but I'm sure the answer will be a firm "NO".
Supporter
Moderators
Dans Club
February 22, 2009
Offline
I'm sure they won't. There's a potential, since the threads would be suited to the frame, you could end up with a 45 cylinder and a 44 tube. No Bueno...
Technically, the glass is always full; half liquid, half air....
1 Guest(s)
