Register
Log In
Home
May 22, 2013
Offline
I was recently cleaning my 14-2 when I realized something was missing right behind the cylinder of the revolver. What is it, what does it do, and where do I get a new one? I'll post pics of the gun without the little nut, and one of it in there before.
Dans Club
April 18, 2014
Offline
by the pic, it looks like your missing the side plate screw and it also looks like in the pic that the roll pin that retains the firing pin is absent.
Oath Keeper #021479 NRA #206814004
Member AAGSR Member AGA #83120600233
"To preserve liberty, it is essential that the whole body of the people always possess arms and be taught alike, especially when young, how to use them."
Richard Henry Lee
American Statesman, 1788
May 22, 2013
Offline
ese927 said
by the pic, it looks like your missing the side plate screw and it also looks like in the pic that the roll pin that retains the firing pin is absent.
Do you know where I would be able to get new or even used replacements for these. Should I just call Dan Wesson support?
Dans Club
April 18, 2014
Offline
may have to call CZ/DW support. check on ewkarms. there is a link on the site here.
Oath Keeper #021479 NRA #206814004
Member AAGSR Member AGA #83120600233
"To preserve liberty, it is essential that the whole body of the people always possess arms and be taught alike, especially when young, how to use them."
Richard Henry Lee
American Statesman, 1788
Dans Club
April 18, 2014
Offline
ewk has a small parts kit has the roll pin in it and you can also check Numrich I think its http://www.gunpartscorp.com. ewk will be cheaper. is this something you recently bought? cause I would think the firing pin and spring are gone as well if the roll pin is missing. can you take the side plate off and take some photos?
Oath Keeper #021479 NRA #206814004
Member AAGSR Member AGA #83120600233
"To preserve liberty, it is essential that the whole body of the people always possess arms and be taught alike, especially when young, how to use them."
Richard Henry Lee
American Statesman, 1788
May 22, 2013
Offline
ese927 said
ewk has a small parts kit has the roll pin in it and you can also check Numrich I think its http://www.gunpartscorp.com. ewk will be cheaper. is this something you recently bought? cause I would think the firing pin and spring are gone as well if the roll pin is missing. can you take the side plate off and take some photos?
I'll take pics tonight when I get off of work, however I think the firing pin is still in. It's a hand me down from my mom who bought it in 1983. I'm lost how the side plate screw or roll pin came out without me noticing.
Dans Club
DWF Supporters
April 20, 2010
Offline
EWK has a small parts kit that comes with both sideplate screws, I THINK they are blued not stainless ones but you would want to inquire first. The kit has the springs and pins etc for the revolver too so it is a nice parts kit to have. Or try contacting Dan Wesson at Norwich I bet they could sell you a sideplate screw.
"The lion and the tiger may be more powerful, but the Wolf does not perform in the circus"
1 Guest(s)
