Register
Log In
Home
August 29, 2009
Offline
I took the rear sight apart and the little spring in the sight shot out the screw. I got lucky and found the 2.5 mm screw. It has a ball on one end and a slotted screw drive end on the other. Which way does it go in? To me the ball should rest on the cuts of the adjusting screw for windage. But then why is it threaded and have a slot for a screwdriver?
How does the screw go in the sight? Is it loose or is it screwed into the sight? The threads are messed up a little.
October 1, 2009
Offline
P M superdan if you don't get any other answers. he is a gunsmith that is VERY
knowledgeable on DW revolvers. He is always willing to help out a fellow DW owners.
August 29, 2009
Offline
I wounder if this is even the part for the sight???
I found it were I though I heard the part fly and land.
October 1, 2009
Offline
I dunno......
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
I hate it when that happens. 
LB
Wisdom is merely the realization of how little one knows, therefore I am wise.
July 5, 2009
Offline
That look similar to a retainer latch screw which crews into the little hole in the front of the crane assembly?
GG
Range Officer
Range Officers
Dans Club
February 28, 2009
Offline
This is another link where the picture width is causing the text of the post to run behind the right hand column.
I discovered something about this. I use FireFox. There is an add-in for FF called image zoom which I installed a long time ago. I right-clicked on the image and selected zoom-out, and bingo the image was a little smaller and the text was restored to within the boundaries of the post column.
-Mike
November 14, 2009
Offline
Mike,
I just wan
for the inf
provided
figure out
Happyness is a Hot DW and a pile of used brass!!! Rich
August 29, 2009
Offline
I ordered a Millett sight as the DW one has side to side movement in the base of the sight.
As for big pic taking over the page, I posted these https://www.danwessonforum.com/?page_id=3/revolvers/large-frame-disassembly-tutorial-pics/ and this pic last night and the mulit pic's I posted turned out in a different format.
August 29, 2009
Offline
zoommb said:
This is another link where the picture width is causing the text of the post to run behind the right hand column.
I discovered something about this. I use FireFox. There is an add-in for FF called image zoom which I installed a long time ago. I right-clicked on the image and selected zoom-out, and bingo the image was a little smaller and the text was restored to within the boundaries of the post column.
-Mike
Link to addon https://addons.mozilla.org/en-US/firefox/addon/139
It works, I just installed it and I can now zoom out and read the secrete message behind the pic.
Supporter
Moderators
January 24, 2009
Offline
zoommb said:
This is another link where the picture width is causing the text of the post to run behind the right hand column.
I'm on it.
Range Officer
Range Officers
Dans Club
February 28, 2009
Offline
mox-ct said:
Mike,
I just wan
for the inf
provided
figure out
mox-
I got
thank
-Mike
CF:
Here's something to look at. I think it happens during a picture-add when you select "middle" for the positioning. It then seems to ignore the size specified.
I did that once (selected middle) because someone said it would solve the problem of text, that should be below a pic, turning up at the right.
I hope this helps you track it down.
-Mike
Supporter
Moderators
January 24, 2009
Offline
zoommb said:CF:
Here's something to look at. I think it happens during a picture-add when you select "middle" for the positioning. It then seems to ignore the size specified.
I did that once (selected middle) because someone said it would solve the problem of text, that should be below a pic, turning up at the right.
I hope this helps you track it down.
-Mike
Thanks, I went in & reattached the pic in the middle position. It looks fixed on my end now, it is ok on yours?
Range Officer
Range Officers
Dans Club
February 28, 2009
Offline
CF:
Yes it is, but it's in the left-justified position, so I don't understand what's going on here.
I hope you do.
-Mike
1 Guest(s)
