Register
Log In
Home
August 9, 2015
Offline
Is it ok to go lower than the recommended barrel gap of .002 on my SuperMags?
I can go lower and the cylinder still rotates freely, Will it bind up once I start to fire and heat things up?
Thanks-
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
It probably will bind. If you shoot slowly and let it cool, as well as keep the carbon off the front of the cylinder you may be able to run it tighter. .002 is mighty tight so I doubt it will accomplish much. Let us know how it turns out.
LB
Wisdom is merely the realization of how little one knows, therefore I am wise.
Supporter
Range Officer
Moderators
DWF Supporters
Dans Club
December 4, 2011
Offline
I'd keep it at a minimum of .002 on the tightest chamber, any closer and it will bind rather quickly due to heat expansion and carbon build up from firing.
Anything worth doing is worth doing well.
My father
If a man designed it, and a man built it, then a man can fix it.
My grandfather
April 25, 2008
Offline
Same experience I have. .002 is just fine, on the tightest chamber. DW's are notorious for having slightly unsquare cylinder faces. Many have been returned to the factory over the years and those were faced off at no charge.
The Savantist
1 Guest(s)
