Register
Log In
Home
Dans Club
DWF Supporters
April 20, 2010
Offline
I bought 2 sets of the Fire Sights for Rugers, installed them this week after seeing one one Smkymtn's 715. I did run into one small issue. On my Palmer 715, the springs are larger diameter and would not fit the Ruger sight. The Ruger springs measure about .117" diameter, but the Palmer springs are .150" diameter. So I ordered 2 Ruger replacement springs from Midway and they worked fine. On my Monson 15-2, the springs were the smaller diameter and worked fine with the new Fire sight. I have EWK FO front sights on both revolvers.
I shot the 15-2 at the range, I really like these sights, especially at shorter ranges they will be great on any Dan you use for defensive purposes or a nightstand gun etc. Fun for target shooting too, they are really nice and bright outdoors.
Williams # for the sight is 70958, the MidwayUSA # for the springs is 423309.
"The lion and the tiger may be more powerful, but the Wolf does not perform in the circus"
Supporter
Moderators
Dans Club
February 22, 2009
Offline
Nice- Looks like a great low-light hunting setup too.
Technically, the glass is always full; half liquid, half air....
Range Officer
Range Officers
Dans Club
March 27, 2009
Offline
looks like a great combo! I may just have to give setup a try, Old eyes like bright sights!
Dans Club
DWF Supporters
April 20, 2010
Offline
Oh and sorry about the crappy pics, I had a couple more but somewhere between the camera and the laptop some of them didn't make it. These pics really dont show off how nice and bright the sights get. I really need a better camera someday.
Lonwolf
"The lion and the tiger may be more powerful, but the Wolf does not perform in the circus"
March 27, 2013
Offline
I'm glad you liked them. I just got in my second rear sight form my 715-22. For the money it's a great product. Enjoy!
All of my Dan's are Monson's so I haven't run into the spring issue. I'm sure your info will help others.
Nathan
August 28, 2009
Offline
Excellent review on the Fire Sight. It looks like we have a nice alternative that can fill the void the Millett's left, and at about half the going price of a Millett. I'll be ordering a couple myself this week.
DWF Supporters
Dans Club
Moderators
November 17, 2008
Offline
Great report. Hey guys maybe we ought to start a topic on aftermarket sights that fit DWs. Anyone want to take the lead on this? Once we gather some good info like this above we can pin it some where for future reference.
What y'all think.
LB
Wisdom is merely the realization of how little one knows, therefore I am wise.
July 10, 2012
Offline
I see the ones you replaced were on "small" framed guns. Does Williams make anything to fit the big-Brother D.W.'s?
And those sights look nice!
And Only Time Will Tell The Ending When The Ink Runs Dry...
Supporter
Moderators
January 24, 2009
Offline
lbruce said
Great report. Hey guys maybe we ought to start a topic on aftermarket sights that fit DWs. Anyone want to take the lead on this? Once we gather some good info like this above we can pin it some where for future reference.What y'all think.
Good idea, especially since the subject seems to come up fairly frequently.
Lonwolf, those sights do look cool!
March 27, 2013
Offline
I figured I would add a few of my pictures here since your thread title will attract more attention to the sights.
September 2, 2012
Offline
If anyone is thinking of buying these sights, Midway has the williams #70958 set on sale for $41.49. I believe the sale is on until the end of May. I ordered a scope at the same time that had free shipping and it looks like they're gonna throw the sights in the same box,so no shipping charge on them either!
Just wanted to pass on the info
David
March 27, 2013
Offline
plowmaster54 said
If anyone is thinking of buying these sights, Midway has the williams #70958 set on sale for $41.49. I believe the sale is on until the end of May. I ordered a scope at the same time that had free shipping and it looks like they're gonna throw the sights in the same box,so no shipping charge on them either!Just wanted to pass on the info
David
Good looking out David. 
By the way, the price of $41.49 is cheaper than you can buy just the rear sight from Williams. I was quoted a price of $45 for just the rear sight direct from Williams. I forsee a flood of Ruger GP100 front sights on ebay in the near future.
DWF Supporters
February 13, 2012
Offline
Those look awesome! I've got the EWK front sights and they look totally cool together. I'm definitely going to order one for my .357. I'd be interested in one for my .44 too, if there is something that would work.
October 12, 2012
Offline
Thanks much! I ordered a set, and would also be interested if something similar was available for the 744.
Can't wait to set this up and try 'em out.
Range Officer
Range Officers
Dans Club
March 27, 2009
Offline
Ok you guys did it just ordered 2 sets!
DWF Supporters
February 13, 2012
Offline
I finally got mine installed yesterday. They look awesome! Of course, now I'll have to find time to actually sight them in. 🙂 Thanks again for the post!
December 2, 2009
Offline
I installed these sights on my Monson large frame 357 max. No Problem except the DW springs were too large.
April 13, 2013
Offline
now if i could only find a supplier in Australia 
Range Officer
Range Officers
Dans Club
March 27, 2009
Offline
als1200 said
now if i could only find a supplier in Australia
They won't ship over seas? Dang that is not nice!
1 Guest(s)
